Description
I. Introduction
HTE-BS3 Automatic flash tester is used to determine the closing flash point value of petroleum products. It adopts advanced technology, uses touched screen replacing of typed keyboard, large LCD screen, without logo button prompts and so on. It is widely used in railway, aviation, electric power, oil industry and scientific research departments, etc.
II. Features
1. Flash point value testing, both open cup and closed cup.
2. Two ignition modes. Platinum resistance wire and gas.
3. Alarm function.When testing temperature over the range.
4. Automatically operation, safe and efficient.
5. Automatic detection function
6. Automatically stored with time stamp historical records, store up to 255.
7. Comply with the United States, the EU and the national standards.
8. USB interface
9. Touch LCD Screen.
10 Printer
III. Parameter
|
Testing Range |
indoor temperature-400ºC |
|
resolution |
0.1ºC |
|
Accuracy |
0.50% |
|
Temperature Probe |
Platinum resistance (PT100) |
|
Flash Fire sensors |
Flash Fire sensors |
|
Power |
< 500W |
|
Rate of Temperature Increase |
conform to the standards such as gb, the United States, the European Union |
|
|
host: 190*260*285 (mm) |
|
furnace: 280*260*285(mm) |
|
|
Weight |
18kg |
